Linklan Network & Connectivity Help

Linklan Hotspot Network & Connectivity FAQs

What is an APN?

APN stands for Access Point Name.

It defines how your Linklan hotspot connects to your mobile carrier’s data network and accesses the internet.

If the APN is incorrect, the hotspot may connect to the cellular network but still be unable to access the internet.

Where can I get the correct APN?

The correct APN should be obtained from your SIM or eSIM provider.

You can usually find it in:

  • The activation email
  • Order confirmation information
  • The provider’s official app
  • SIM card packaging
  • Setup instructions
  • The provider’s official Help Center

Do not use random APN settings found online, as APN requirements may vary by carrier and data plan.

How do I manually configure an APN?

  1. Connect your phone or computer to the Linklan hotspot Wi-Fi.
  2. Open a browser and enter the device’s local management address.
  3. Go to Network Settings → Profile.
  4. Tap or click + to add a new profile.
  5. Enter the APN provided by your SIM or eSIM provider.
  6. Save the profile.

The profile name can be customized.

Other fields can normally be left blank unless your provider specifically requires additional information.

What should I check if the hotspot has signal but no internet?

Check the following:

  1. Make sure the correct SIM or eSIM plan is active.
  2. Check that the APN is correct.
  3. Check which carrier the hotspot is currently connected to.
  4. Confirm that the data plan supports your current country or region.

If your SIM or eSIM provider requires a specific carrier, you can manually select the carrier through Network Settings.

Does Linklan automatically select a local carrier?

Yes.

When using a Linklan data plan, the hotspot automatically selects an available local carrier supported by the plan.

Normally, no manual network selection is required.

When do I need to manually select a carrier?

Manual carrier selection is mainly required when a third-party SIM or eSIM provider instructs you to connect to a specific carrier.

To select a carrier manually, open the device’s local management page and go to Network Settings.

Select the carrier specified by your SIM or eSIM provider.

Why is my Linklan 5G hotspot only connecting to 4G?

The most common causes are:

  • Limited or unavailable local 5G coverage
  • Weak 5G signal
  • SIM or eSIM plan restrictions
  • Carrier restrictions

Try the following:

  1. Re-activate the current plan or refresh the network connection.
  2. Check whether 5G coverage is available in your current location.
  3. Confirm that your SIM or eSIM plan supports 5G access.
  4. Contact your carrier or eSIM provider to confirm that 5G access is enabled for your plan.

If 5G is unavailable or unstable, the hotspot may automatically fall back to 4G to maintain a stable connection.

Why does my Linklan hotspot work in one country but not another?

First, check whether your Linklan hardware supports the country or region you are currently in.

Only the Linklan 5G hotspot uses regional hardware versions:

  • EuraGo – Europe, Asia, Oceania, and major parts of Africa
  • AmeriGo – North America, Central America, the Caribbean, and South America

Other Linklan hotspot models are designed for global use.

Next, check whether your active SIM or eSIM data plan supports the destination.

Even if the hardware is compatible, the hotspot may not connect if the active plan does not include coverage in that country or region.

Will my Linklan hotspot automatically connect after I travel to another country?

Yes.

When you arrive in another country or region supported by your active data plan, the hotspot will automatically connect to an available carrier network supported by that plan.

No manual carrier selection is normally required unless your SIM or eSIM provider specifically instructs you to select a particular network.